E bikes or electric bicycles are becoming increasingly popular day by day and out of which people are loving specially men are loving fat tires solid build e bike. And, Burchda RX80 eBike is exactly what people wanted from fat tire solid-build good looking e bike to most affordable and cheap fat tire e bike making it one of the first choices for people who wanted to buy fat tires eBike.
And, if you are also a fat-tire ebike lover and have already bought Burchda RX80 ebike and struggling on how to start burchda RX80 ebike then, this article is all what you need. So, read this article completely to figure out or understand the correct way to start your ebike.
Step-by-Step guide on how to start Burchda RX80 ebike?
Check ebike’s battery
Before starting your e bike make sure that your battery is fully charged and it is not uncharged. By the way, Burchda RX80 ebike comes with already fully charged battery but if your battery isn’t charged then, charge the battery using the charger and charging cord provided in the package in which e-bike came.
Power on your ebike
The power button is typically found on the handlebar of most ebikes and Burchda RX80 ebike also has its power button on the handlebar. Now, press and hold the power button for two seconds to turn on the display of the ebike.
Activate and set the Pedal Assist System(PAS)
Before activating Pedal Assist System or PAS, let’s just quickly understand what it is. So, PAS is a feature available in ebikes using which an extra power is generated through each pedal i.e., the motor assists ebike only when you pedal. You can choose a PAS level of one to five depending on your need and speed at which you want to ride your ebike.
To activate PAS, locate the arrow keys on the keypad and press the up arrow button to activate the PAS and as you press the up arrow button the PAS level will start increasing from 1 to 5 but if you are riding for the first time then, start with a low or moderate PAS level like at level-1 and increase the PAS level as you gain confidence.
Safety Cautions before riding your ebike
Before going on a ride or hitting the road, it is crucial to take some time and perform a few safety checks.
- Inspect the brakes: Test the brakes of your ebike properly to ensure that they are functioning correctly because an effective braking is essential for your safety.
- Check the lights: Ensure that the lights of your ebike are working properly especially if you are going to ride at night or in a low-light area.
- Check Tires: Make sure to double-check that the tires are properly inflated to the pressure recommended in the ebike’s user manual. A proper tire inflation is critical for a smooth and hassle-free ride.
- Wear Helmet: Never forget to wear a helmet before going for a ride and also consider additional protective gear like gloves for enhanced safety.
Start your first ride on Burchda rx80 ebike
Now, your e bike is ready and set-up. It’s time to start riding your ebike the very first time. To start riding your ebike follow these steps:
Mount the e-bike
You can mount your ebike also just like you would mount your regular bike. The most common or usual way to mount any bike or an ebike is by swinging your leg over after grasping the front and the left-hand brakes.
Caution: One caution while mounting an ebike is to make sure that the motor is turned off as the throttle may get twisted accidently which might result in an accident.
Start Pedaling
After the PAS gets activated or turned on, you’ll feel an extra push and increase in speed each time you pedal on the ebike. And, if the PAS is off then, you’ll feel like riding a regular bike or cycle and no extra push or power would be felt while pedaling. The motor assistance will depend on the PAS level you have selected.
Use the Throttle
Gently twist the throttle to engage the motor and increase the speed of the ebike. The maximum speed of Burchda RX80 ebike is 28mph.
Control Acceleration
E bikes can accelerate very quickly while riding, so apply gentle pressure on the throttle and pedals to gradually accelerate without losing control on your ebike.
Conclusion
Riding an ebike very first time can be a little challenging but if you start your ebike correctly after fully understanding about PAS and it’s function as explained above in the article then, half of your stress will be gone. Now you just have to balance the ebike properly and you can enjoy the ride. And last but not the least, remember to prioritize safety by wearing a helmet and checking the seat height and brakes of the ebike before jumping on riding it.